Staples for Rabbit Jumps
The staples I make are handmade from 2mm stainless steel wire. The staples are bent to keep the bar in place in strong winds, as the bar can be moved from either side.
They fit bars with a diameter of 16-20mm.

The price applies to one staple.

Delivery time for staples may be longer, as it takes more time to manufacture.

Assembly
The staples retain their shape; they only bend under heavy hammering or intentional bending. Follow the steps below for the best results:
  
Pre-drill with a 2mm or 2.5mm drill bit, the hole should be about 1-2 cm deep.
  
Apply wood glue in the hole or on the two ends of the staple.
  
Gently insert the staple with your fingers or carefully tap it in with a hammer.
  
If you have glue around the staple or on the jump, simply wipe it off.